NETGEAR Webcam WNDA3100v3 User Manual

Quick Start  
If the Resource CD screen does not display, browse the files on the CD  
and double-click the Autorun.exe file.  
5. Insert the adapter into a USB port on your computer with or without the  
USB cable and plastic cradle.  
Note: The USB cable and plastic cradle can extend the range of your  
adapter and improve WiFi reception.  
The NETGEAR Resource CD screen displays.  
2. Click the Setup button.  
To use the adapter with the USB cable and plastic cradle:  
The Soſtware Update Check screen displays.  
a. Place a fastener on the back of the plastic cradle and place another  
fastener on your computer.  
3. Install the setup soſtware using one of the following methods.  
N600 WiFi USB Adapter  
Connected to the Internet. If you are connected to the Internet,  
click the Check for Updates button. Aſter the soſtware checks  
for updates, the Update Check Complete screen displays. Click the  
Continue button. The Welcome screen displays.  
Make sure that the surfaces on which you are placing the fasteners are  
clean and dry.  
Model WNDA3100v3  
Package Contents  
Not connected to the Internet. If you are not connected to the  
Internet, click the Install from CD button. The Welcome screen  
displays.  
4. To accept the license agreement, select the I agree radio button and  
click the Next button.  
A message displays asking you to wait while soſtware is installed. Aſter a  
few minutes, NETGEAR genie prompts you to insert your adapter.  
Adapter  
Resource CD  
b. Insert the adapter into the plastic cradle.  
c. Connect the USB cable to the adapter.  
Note: NETGEAR recommends using the USB cable that is supplied in  
the package. Do not use another USB cable to connect the adapter to  
the USB port on your computer. Using another USB cable might affect  
the performance and correct functioning of the adapter.  
Plastic cradle  
Fasteners  
USB cable  
Set Up NETGEAR genie  
d. Connect the USB cable to a USB port on your computer.  
e. Join the fasteners together.  
You can set up NETGEAR genie and use it to join a WiFi network. If you do  
not want to use NETGEAR genie, you can install a Windows standalone  
driver and use the Windows WLAN Autoconfig service or the Wireless Zero  
Configuration service to join a WiFi network. For more information, see  
1. Insert the resource CD in your computer CD drive.  
Note: If your computer does not include a CD drive, download the  
WNDA3100v3 resource CD driver by visiting  
http://support.netgear.com. Click the Support For Home button and  
enter WNDA3100v3 in the search field.  
 

Miele Ventilation Hood DA 6290 W User Manual
Multiquip Oxygen Equipment C 30HD User Manual
NEC Computer Monitor FE750 Plus User Manual
Nortel Networks Network Card P0908544 User Manual
Oregon Scientific Games BW68 User Manual
Oricom Two Way Radio PMR1200 User Manual
Oster Microwave Oven OTM1101GBS User Manual
Outlaw Audio Portable Speaker LFM 1EX User Manual
Palsonic Flat Panel Television PDP4225HD User Manual
Panasonic Digital Camera BB HNP11CE User Manual