OEM Systems Indoor Furnishings BB 11 User Manual

Box Buddy low voltage mounting rings are  
designed for positioning low voltage devices  
next to 110 VAC electrical boxes with stan-  
dard NEC spacing so that the combined 110  
and low voltage device(s) may be covered  
with one multi-gang coverplate for an  
elegant appearance. The Box Buddy uses a  
patent pending pull-off alignment tool that  
makes combined installation and alignment  
of 110 VAC and low voltage devices simple  
and quick.  
Box Buddy  
Low Voltage Mounting Rings  
Pull-off alignment tool  
Box Buddy low voltage mounting rings  
feature conduit flanges off-set by 5/8" which  
enable un-obtrusive use of conduit connec-  
tors (see photo bottom of page on reverse).  
BB-11  
Add 1 Low Voltage device to a 1 gang 110 VAC Box  
110 Box  
BB-12  
Add 2 Low Voltage devices to a 1 gang 110 VAC Box  
BB-21  
Add 1 Low Voltage device to a 2 gang 110 VAC Box  
110 box and Box Buddy with  
alignment tool in place  
BB-22  
Add 2 Low Voltage devices to a 2 gang 110 VAC Box  
OEM Systems Company, Inc.  
740 Freeport Blvd., #106 Sparks, NV 89431-6168  
775 355-0405 Fax 775 355-0646  
Product materials & specifications are subject to change / improvement  
 

Minolta Digital Camera ME 0308 User Manual
MSi Computer Drive US54G User Manual
Multiquip Pet Fence mtr 40hs User Manual
Napoleon Grills Gas Grill II 600 User Manual
National Instruments DJ Equipment NI LabVIEW User Manual
Navman GPS Receiver iCN 320 User Manual
NETGEAR Switch GS104 User Manual
Nokia Cell Phone N93i 1 User Manual
Numark Industries Music Mixer DXM03 User Manual
Patton electronic Stereo Receiver SmartNode 4300 User Manual