Omron Healthcare Switch D7E User Manual

Sealed Tilt Switch  
D7E  
• Pure mechanical vibration detector  
• Sealed enclosure  
• Output capacity from 0.1 A at 5 VDC to 100 A at 30 VDC  
• RoHS Compliant  
Ordering Information  
Operating Angle  
Model  
D7E-3  
50 to 80 degrees  
Characteristics  
Operating angle  
Tilt of 50 to 80 degrees  
The value of tilt degree is specified when the switch is tilted gradually (approx. 1 degree/s) from the horizontal.  
Tilt of more than 25 degrees.  
Returning angle  
The value of tilt degree is specified when the switch is tilted gradually (approx. 1 degree/s) from the horizontal.  
1 degree max. from the horizontal  
Permissible mounting level  
Contact form  
Single pole single throw (NC contact / slow action)  
Pitch: 30 mm 2 screws (M3)  
Mounting  
Height: 5.3mm  
Soldering  
Soldering iron: temperature 350 10°, 3 sec. max  
5 VDC, 0.1 mA to 30 VDC, 100 mA (resistive load)  
100 Mmin. (250 VDC, between each terminal of the same polarity)  
To measure off condition  
Ratings  
Insulation resistance  
Contact resistance  
300 m Ohm max. (Initial value)  
Vibration during  
transportation  
Condition: Vibration: 200 gal (1 cycle: 0.5 sec.)  
Vibration direction: 2 axial directions  
Time: Total 50 hours  
Condition: Acceleration: 980 m/s2 3 times  
Shock direction: 3 axial directions  
Temperature: -25° to +60° (with no icing and condensation)  
Humidity: 45 to 95% RH  
Shock  
Operating temperature and  
humidity  
Storage temperature and  
humidity  
Temperature: -25° to +60° (with no icing and condensation)  
Humidity: 45 to 95% RH protection  
IP67  
Protection  
70  
Sealed Tilt Switch D7E  
 
Terms and Conditions of Sale  
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the  
part of all quotations, acknowledgments, invoices, purchase orders and other  
documents, whether electronic or in writing, relating to the sale of products or  
services (collectively, the "Products") by Omron Electronic Components LLC  
("Seller"). Seller hereby objects to any terms or conditions proposed in  
Buyer's purchase order or other documents which are inconsistent with, or in  
addition to, these Terms.  
Products will be free from defects in materials and workmanship for a period of  
twelve months from the date of sale by Seller (or such other period expressed  
in writing by Seller). Seller disclaims all other warranties, express or implied.  
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,  
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-  
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.  
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE  
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR  
INTENDED USE. Seller further disclaims all warranties and responsibility of  
any type for claims or expenses based on infringement by the Products or oth-  
erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obli-  
gation hereunder shall be to replace (in the form originally shipped with Buyer  
responsible for labor charges for removal or replacement thereof) the non-  
complying Product or, at Seller's election, to repay or credit Buyer an amount  
equal to the purchase price of the Product; provided that in no event shall  
Seller be responsible for warranty, repair, indemnity or any other claims or  
expenses regarding the Products unless Seller's analysis confirms that the  
Products were properly handled, stored, installed and maintained and not sub-  
ject to contamination, abuse, misuse or inappropriate modification. Return of  
any Products by Buyer must be approved in writing by Seller before shipment.  
Seller shall not be liable for the suitability or unsuitability or the results from the  
use of Products in combination with any electrical or electronic components,  
circuits, system assemblies, or any other materials or substances or environ-  
ments. Any advice, recommendations or information given orally or in writing  
are not to be construed as an amendment or addition to the above warranty.  
2. Prices; Payment. All prices stated are current, subject to change without  
notice by Seller. Buyer agrees to pay the price in effect at time of shipment.  
Payments for Products received are due net 30 days unless otherwise stated  
in the invoice.  
3. Discounts. Cash discounts, if any, will apply only on the net amount of  
invoices sent to Buyer after deducting transportation charges, taxes and  
duties, and will be allowed only if (i) the invoice is paid according to Seller's  
payment terms and (ii) Buyer has no past due amounts owing to Seller.  
4. Currencies. If the prices quoted herein are in a currency other than U.S. dol-  
lars, Buyer shall make remittance to Seller at the then current exchange rate  
most favorable to Seller and which is available on the due date; provided that if  
remittance is not made when due, Buyer will convert the amount to U.S. dol-  
lars at the then current exchange rate most favorable to Seller available during  
the period between the due date and the date remittance is actually made.  
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all  
costs involved in, obtaining any government approvals required for the impor-  
tation or sale of the Products.  
6. Taxes. All taxes, duties and other governmental charges (other than general  
real property and income taxes), including any interest or penalties thereon,  
imposed directly or indirectly on Seller or required to be collected directly or 13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL,  
indirectly by Seller for the manufacture, production, sale, delivery, importation,  
consumption or use of the Products sold hereunder (including customs duties  
and sales, excise, use, turnover and license taxes) shall be charged to and  
remitted by Buyer to Seller.  
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF  
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON-  
NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN  
CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in  
no event shall liability of Seller exceed the individual price of the Product on  
which liability is asserted.  
7. Financial. If the financial position of Buyer at any time becomes unsatisfactory  
to Seller, Seller reserves the right to stop shipments or require satisfactory  
security or payment in advance. If Buyer fails to make payment or otherwise 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and  
comply with these Terms or any related agreement, Seller may (without liability  
and in addition to other remedies) cancel any unshipped portion of Products  
sold hereunder and stop any Products in transit until Buyer pays all amounts,  
including amounts payable hereunder, whether or not then due, which are  
owing to it by Buyer. Buyer shall in any event remain liable for all unpaid  
accounts.  
its employees from and against all liabilities, losses, claims, costs and  
expenses (including attorney's fees and expenses) related to any claim, inves-  
tigation, litigation or proceeding (whether or not Seller is a party) which arises  
or is alleged to arise from Buyer's acts or omissions under these Terms or in  
any way with respect to the Products. Without limiting the foregoing, Buyer (at  
its own expense) shall indemnify and hold harmless Seller and defend or settle  
any action brought against Seller to the extent that it is based on a claim that  
any Product made to Buyer specifications infringed intellectual property rights  
of another party.  
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation  
unless Buyer indemnifies Seller fully against all costs or expenses arising in  
connection therewith.  
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery 15. Property; Confidentiality. The intellectual property embodied in the Products is  
resulting from causes beyond its control, including earthquakes, fires, floods,  
strikes or other labor disputes, shortage of labor or materials, accidents to  
machinery, acts of sabotage, riots, delay in or lack of transportation or the  
requirements of any government authority.  
the exclusive property of Seller and its affiliates and Buyer shall not attempt to  
duplicate it in any way without the written permission of Seller. Notwithstand-  
ing any charges to Buyer for engineering or tooling, all engineering and tooling  
shall remain the exclusive property of Seller. All information and materials sup-  
plied by Seller to Buyer relating to the Products are confidential and propri-  
etary, and Buyer shall limit distribution thereof to its trusted employees and  
strictly prevent disclosure to any third party.  
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:  
1. Shipments shall be by a carrier selected by Seller;  
2. Such carrier shall act as the agent of Buyer and delivery to such carrier  
shall constitute delivery to Buyer;  
16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right  
and no course of dealing between Buyer and Seller shall operate as a waiver  
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder  
without Seller's written consent. (c) Law. These Terms are governed by Illi-  
nois law (without regard to conflict of law principles). Federal and state courts  
in Illinois shall have exclusive jurisdiction for any dispute hereunder.  
(d) Amendment. These Terms constitute the entire agreement between Buyer  
and Seller relating to the Products, and no provision may be changed or  
waived unless in writing signed by the parties. (e) Severability. If any provision  
hereof is rendered ineffective or invalid, such provision shall not invalidate any  
other provision. (f) Setoff. Buyer shall have no right to set off any amounts  
against the amount owing in respect of this invoice.. (g) Definitions. As used  
herein, "including" means "including without limitation".  
3. All sales and shipments of Products shall be FOB shipping point (unless  
otherwise stated in writing by Seller), at which point title to and all risk of  
loss of the Products shall pass from Seller to Buyer, provided that Seller  
shall retain a security interest in the Products until the full purchase price is  
paid by Buyer;  
4. Delivery and shipping dates are estimates only.  
5. Seller will package Products as it deems proper for protection against  
normal handling and extra charges apply to special conditions.  
11. Claims. Any claim by Buyer against Seller for shortage or damage to the  
Products occurring before delivery to the carrier must be presented in writing  
to Seller within 30 days of receipt of shipment and include the original trans-  
portation bill signed by the carrier noting that the carrier received the Products  
from Seller in the condition claimed.  
 
Certain Precautions on Specifications and Use  
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's  
dards, codes or regulations which apply to the combination of the Product in  
programming of a programmable product, or any consequence thereof.  
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as a  
vide applicable third party certification documents identifying ratings and limita-  
tions of use which apply to the Product. This information by itself is not  
sufficient for a complete determination of the suitability of the Product in combi-  
nation with the end product, machine, system, or other application or use.  
guide for the user in determining suitability and does not constitute a warranty  
It may represent the result of Seller's test conditions, and the users must corre  
late it to actual application requirements. Actual performance is subject to  
Seller's Warranty and Limitations of Liability.  
Buyer shall be solely responsible for determining appropriateness of the partic- 4. Change in Specifications. Product specifications and accessories may be  
ular Product with respect to Buyer's application, product or system. Buyer  
shall take application responsibility in all cases but the following is a non-  
exhaustive list of applications for which particular attention must be given:  
(i) Outdoor use, uses involving potential chemical contamination or electrical  
interference, or conditions or uses not described in this document.  
(ii)Energy control systems, combustion systems, railroad systems, aviation  
systems, medical equipment, amusement machines, vehicles, safety  
equipment, and installations subject to  
changed at any time based on improvements and other reasons. It is our prac  
tice to change part numbers when published ratings or features are changed  
or when significant construction changes are made. However, some specifica  
tions of the Product may be changed without any notice. When in doubt, spe  
cial part numbers may be assigned to fix or establish key specifications for you  
application. Please consult with your Seller representative at any time to con  
firm actual specifications of purchased Product.  
5. Errors and Omissions. The information in this publication has been carefully  
checked and is believed to be accurate; however, no responsibility is assumed  
for clerical, typographical or proofreading errors, or omissions.  
6. RoHS Compliance. Where indicated, our products currently comply, to the bes  
of our knowledge as of the date of this publication, with the requirements of the  
European Union's Directive on the Restriction of certain Hazardous Sub  
stances ("RoHS"), although the requirements of RoHS do not take effect unti  
July 2006. These requirements may be subject to change. Please consult ou  
website for current information.  
separate industry or government regulations.  
(iii)Use in consumer products or any use in significant quantities.  
(iv)Systems, machines and equipment that could present a risk to life or  
property. Please know and observe all prohibitions of use applicable to this  
product.  
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS  
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM  
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT  
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE  
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.  
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website  
at www.components.omron.com under the “About Us” tab, in the Legal Matters section.  
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.  
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.  
OMRON ON-LINE  
OMRON ELECTRONIC  
COMPONENTS LLC  
55 E. Commerce Drive, Suite B  
Schaumburg, IL 60173  
OMRON CANADA, INC.  
885 Milner Avenue  
Toronto, Ontario M1B 5V8  
416-286-6465  
847-882-2288  
Cat. No. JB301-E3-01  
3/05  
Specifications subject to change without notice  
Printed in USA  
 

Milwaukee Caulking Gun 2441 20 User Manual
Multiquip Portable Generator DCA 125USJ User Manual
Multiquip Trash Compactor MVC80VH VHW User Manual
Murphy Automobile Parts AT 04060N User Manual
Musica CD Player CRW4260tx User Manual
National Instruments Network Card NI 9485 User Manual
NETGEAR Switch FS516 User Manual
Oregon Scientific Laptop LC68 12 User Manual
Panasonic Computer Monitor AG HMC150 User Manual
Parasound Stereo Amplifier Zpre2 User Manual