Panasonic Network Card AXJ4 User Manual

MINIATURE INTERFACE  
CONNECTOR COMPLIANT  
WITH USB 2.0/ON-THE-GO  
Mini USB (AXJ4)  
CONNECTORS  
FEATURES  
APPLICATIONS  
1. Compliant with USB 2.0-OTG  
(Transmission speed: 480 Mbps)  
2. 7.7 mm deep space-saving size  
Since the depth is 7.7 mm, the occupied  
space is approx.  
1. DSC, PMP, DVC, IC recorders  
2. Mobile phones, PDA, smart phones  
3. Compact PC peripherals (e.g.  
external HDD, memory card readers)  
4. Game machines  
15% smaller than competing standard  
connectors (depth: approx 9.0 mm).  
3. Reinforced fixing strength between  
the body and shell  
The high strength allows for the forcible  
insertion of a plug.  
Compliance with RoHS Directive  
ORDERING INFORMATION  
AXJ  
4
1
1
1
0
G
4: Mini USB connectors  
<Receptacle>  
1: 5 contacts receptacle  
(Compliant with the Mini USB standard)  
<Composition>  
3: Mini B right angle type  
6: Mini AB right angle type  
<Mounting type>  
1: Standard, with suction tape  
<Terminal and Retention fitting>  
1: Terminal portion: SMD,  
Retention fitting portion: SMD,  
Positioning bosses: Provided  
<Flange shape>  
0: Without flange  
<Package>  
G: Embossed tape packaging  
PRODUCT TYPES  
Packing quantity  
Positioning  
bosses  
Type  
Terminal shape  
Flange  
Part number  
Inner carton  
(Embossed)  
Outer carton  
Mini B  
AXJ413110G  
AXJ416110G  
5 contacts receptacle  
Right angle type  
Terminal position: SMD  
Clips (retention fitting): SMD  
(Compliant with the  
Provided  
Without flange  
1,200  
6,000  
Mini AB  
Right angle type  
Mini USB standard)  
Matsushita Electric Works, Ltd.  
 
AXJ4  
mm General tolerance: 0.3  
DIMENSIONS  
1. Mini B Right angle type  
Recommended PC board pattern  
(TOP VIEW)  
AXJ413110G  
3.20  
0.80 0.15  
0.25  
0.95 0.05 dia. (hole)  
3.2 0.05  
0.8 0.05  
2.0 0.1  
0.4 0.05  
7.70  
9.90  
PC board edge  
4.4 0.05  
8.9 0.1  
Terminal No.1  
6.90  
Terminal No.5  
With a plug inserted:  
Including the projection of the spring  
in the shell contact section  
5.95  
0.80 dia.  
4.40  
5.87  
mm General tolerance: 0.3  
2. Mini AB Right angle type  
AXJ416110G  
Recommended PC board pattern  
(TOP VIEW)  
3.20  
0.80 0.15  
0.25  
0.95 0.05 dia. (hole)  
3.2 0.05  
0.8 0.05  
0.4 0.05  
2.0 0.1  
7.70  
9.90  
PC board edge  
4.4 0.05  
8.9 0.1  
6.90  
Terminal No.5  
Terminal No.1  
With a plug inserted:  
Including the projection of the spring  
in the shell contact section  
5.95  
0.80 dia.  
4.40  
5.32  
EMBOSSED TAPE DIMENSIONS (unit: mm)  
Tape dimensions (Conforming to JIS C 0806-3 1999)  
• Reel dimensions (Conforming to EIAJ ET-7200B)  
24.0 0.3  
11.5  
1.75  
25.4 1  
Taping reel  
Top cover tape  
4.0  
2.0  
Embossed carrier tape  
380 dia.  
Embossed mounting-hole  
12.0  
1.5 dia.  
Matsushita Electric Works, Ltd.  
 
AXJ4  
NOTES  
1. Use of a cover is recommended  
when using this device in order to  
prevent scraps, dust, dirt, etc., from  
getting inside of the receptacle.  
2. PC board design  
4. Since excessive force on the  
terminals will cause deformation and  
the integrity of the soldering will be  
lost during reflow soldering, avoid  
dropping or rough handling of the  
product.  
5. PC board warpage should be  
controlled less than 0.03mm to entire  
length of the connector.  
Please refer to the recommended PC  
board pattern to ensure the strength of  
soldered portion of terminals.  
3. Soldering  
1) Manual soldering  
6. Repeated bending of terminals and  
holding parts can result in terminals  
breaking.  
7. Regarding after soldering  
connectors on PC boards  
• Please set up temperature and applied  
time of soldering iron as indicated in  
specification sheet.  
• Please use soldering iron after  
confirming removal of dispersed solder  
flux on the contact surface by use of  
magnifying glass after each soldering.  
• Please properly clean soldeing iron.  
2) Reflow soldering  
• Screen printing is recommended for  
cream solder printing.  
• Screen thickness of 0.15mm is  
recommended for cream solder printing.  
• When applying different thickness of  
screen, please consult us.  
• Depending upon size of connector, self  
alignments may not be expected.  
Please pay attention to align terminals  
and soldered pads.  
• The following diagram shows the  
recommended reflow soldering  
temperature profile.  
• After mounting connectors on PC  
boards, do not apply excessive loads to  
the connector by piling up the boards.  
• Please do not add the force to the  
connector during assembled connector  
on PC board.  
8.This connector has metal shell for  
preventing EMI, when designing an  
enclosure the followings should be  
considered. Guide for plug entrance  
should be arranged in order to prevent  
distorted insertions. Provide a cover  
to reinforce the metal shell portions of  
the receptacle.  
9. We recommend the use of a  
purified-water-based solution for  
cleaning the PC board. If you use an  
alcohol-based solution, the surface of  
the molded part may be whitened. In  
addition, please carefully monitor the  
contamination degree of the solution  
to prevent the solution from re-  
contaminating the connector  
contacts.  
Temperature  
Maximum temperature  
Max. 260°C  
200°C  
Pre-heating  
150 to 175°C  
60 to 120 second  
Max. 70 sec  
Time  
10. Others  
• The temperature measured on the PC  
board surface near connector terminals.  
• After reflow soldering, in case of PC  
board surface the reverse side using  
reflow soldering, for example an adhesive  
and so on connector of fixed disposition.  
3) Rework of soldering portion  
To prevent insulation deterioration of PC  
board after soldering, please avoid  
adhesion coating agent to terminals in  
case of coating.  
For other details, please verify with  
the product specification sheets.  
• Rework is one time.  
• In case of soldering rework of bridges.  
Please use a flat-head soldering iron and  
don’t use supplementary solder flux.  
• Please use the soldering iron under  
specification’s temperature  
Matsushita Electric Works, Ltd.  
 

Miele Convection Oven H 333 User Manual
Moxa Technologies Network Card NPort 5600 User Manual
MTD Tiller 410 Thru 420 User Manual
Multiquip Appliance Trim Kit MVH406DSCPAS User Manual
Murphy Network Card ASM170 User Manual
National Instruments Network Card NI PXI 8250 User Manual
Nikon Digital Camera 1 J1 User Manual
Omega Speaker Systems Thermometer HH303 User Manual
Omron Thermometer Flex Temp Start User Manual
Ozark Trail Tent WMT 9920 User Manual